J N ARORA GROUPJ N ARORA SUPPLIERS

Products - Offset Products - Offset Chemicals - Boettcher

bottcher

CHAIN LUBRICANTS

 

boettcher productsBOETTCHERIN 60 – It is a washing agent for cleaning printing blankets and rollers in sheet-fed and newspaper presses. It is suitable for both manual as well as automatic cleaning installations. It mixes well with water, low evaporation rate, economical quantity consumption. (flash point > 60°C).


BOETTCHERIN OFFSET 4015 – It is a washing agent for cleaning printing rollers. Printing blankets and printing plates. It is temporarily water miscible wash with medium evaporation rate and a high cleaning power. (flash point approx. 42°C).


BOETTCHERIN OFFSET – Washing agent for manual cleaning of printing blankets. Water miscible, low odour, medium evaporation and good washability. (flash point >25°C).


BOETTCHERIN OFFSET UV – It is wash suitable for rollers and blankets in UV-printing for both manual cleaning and use in automatic washing systems (brush rollers) to remove UV inks. Completely water miscible, slow evaporation and economical. (flash point approx. 82°C).


BOETTCHERIN COMBI – Blanket and Roller wash for presses printing alternatively with UV and conventional inks. It is suitable for manual as well as automatic cleaning systems. It can also be used for cleaning when printing with hybrid inks. It is water miscible and has good dissolving power of UV and conventional inks. (flash point approx 65°C).


BOETTCHERIN FR 1000 – It is a special wash for removal pf ink build-up on dampening pan rollers or dampening metering rollers in continuous dampening systems, desensiting both rubber and chrome surfaces. This kind of product is important as the dampening characteristics of modern continuous dampening units depend on the surface of the dampening rollers and on their cleanliness. Especially in alcohol reduced printing, there is an increased build-up of ink on the dampening rollers which desensitizes their surfaces reducing their hydrophilic nature.


Spray powder


BOETTCHER PRO SILUX 20 – It is a fine Anti set-off spray powder to be used with conventional printing inks and water lacquers, for subsequent laminating, lining or lacquering and for inline-lacquering with aqueous dispersion coating on paper. It is starch based powder, safe for health with excellent flow and processing properties, low build-up on blanket, no lumping, insensitive to humidity and with no negative effects on smooth finish or gloss. It is insensitive to humidity.


BOETTCHER PRO SILUX 35 – It is a coarse Anti set-off spray powder to be used with conventional printing inks and water lacquers, for subsequent laminating, lining or lacquering and for inline-lacquering with aqueous dispersion coating on carton packaging. It is starch based powder, safe for health with excellent flow and processing properties, low build-up on blanket, no lumping, insensitive to humidity and with no negative effects on smooth finish or gloss. It is insensitive to humidity.


FOUNTAIN SOLUTIONS

 

BOETTCHERFOUNT S 3010 – Fountain solution additive for a broad range of applications in sheet-fed offset printing. Ideally suited for reduction of alcohol to 6-8% (vol.). In solutions with a concentration of 2%, it can be used for medium to hard water. It reduces build-up of paper dust on ink rollers and improves drying. The product is corrosion inhibited and approved by press manufacturers.


BOETTCHERFOUNT S 3011 - Fountain solution additive for a broad range of applications in sheet-fed offset printing, additionally with plate protection, particularly for use with CTP plates. Ideally suited for metallic pigments inks. In solutions with a concentration of 2%, it can be used for medium to hard water.


BOETTCHERFOUNT S 3020 – Fountain solution additive, particularly for soft water, it reduces build-up of paper dust on ink rollers and improves drying. The product is corrosion inhibited and approved by press manufacturers.


BOETTCHERFOUNT S 3021 - Fountain solution additive, particularly for soft water and CTP Plates. It minimizes build-up of paper dust and ink on the blanket in the printed area. Recommended for conventional and continuous dampening units, and even for improved plate protection during press stops. No problem with copper rollers and pH value of 4.5 with soft water.


Print Aids


BOETTCHERPRO CLEANFIX – It is a cleaning paste for inking rollers; prevents accumulation of dirt deposits and glazing if used regularly. Chemical and physical action ensures thorough cleaning into material pores. Ideal for cleaning between color changes from dark to light inks. It is packed in tubes for easy and economical application.


BOETTCHERPRO CALCIUMFIX – Cleaning gel for removal of stubborn calcium deposits on inking rollers. The original ink transfer properties are restored. Regular use (once a week) helps prevent accumulation of calcium deposits. It is packed in tubes for easy and economical application.


BOETTCHERPRO ROL-O-PAST – Cleaning and rejuvenating paste for inking rollers; for removal stubborn deposits on older inking rollers. Occasional application on rollers removed from presses restores the ink transfer properties of glazed rollers.


ALCOHOL

 

IPA – Isopropyl alcohol of high purity and quality (min 99.8%) as additive to dampening water. It is also FOGRA approved.


IPA SPECIAL – Economic isopropyl alcohol of high quality (min 80.8%) as additive to dampening water.

jn arora
Copyright 2010 @ www.jnarora.com
Site Designed & Developed by Concorde Infotech Systems